ZX5 type adhesive characteristics of a product, the product is a polymer-modified cement-based adhesive with a construction operation performance, adhesion properties than traditional cement mortar has greatly improved. 2, with no need to dip brick, thin construction, strong bond, easy hollowing, non-toxic environmental protection, weather resistance, water resistance. Categories and use common type: ZX5 ceramic tile adhesive, suitable for indoor, wall and floor ceramic tiles paste, wipe the surface can be used for waterproofing membrane protection layer. Enhanced: ZX5 type adhesive tiles, suitable for indoor, wall and floor tiles paste, whole body tiles, mosaic, cultural stone, acid tile, sheet or the like. Powerful: ZX5 type marble adhesive, suitable for indoor, wall and floor thin paste of marble, large pieces of stone, granite, marble and other large artificial stone. A construction process, the base surface treatment 1, all the base surface should be solid, dry, clean, no shaking, no oil, wax stains, concrete curing agents and other loose material. ? 2, the base paint surface should be rough, exposed at least 80% of the original substrate. 3, the new concrete surface should be at least 28 days before curing paving; new plaster base surface should be cured a minimum of seven days before paving. 4, the old concrete or plaster base surface can use industrial detergent or degreaser to clean, rinse with water cannons, dry surface after 24h before the tiling. ? 5, remove the concrete surface residue, especially on sloping concrete slab the remaining release agent. ? 6, in the water absorption of the substrate or at high temperatures, dry conditions, before construction must first wet the base surface. ? Second, the preparation of the material? 1, the mixing ratio of the product with water per 20 kg (a whole bag) Binder water 5L to 5.5L. ? 2, while stirring, first with water and then poured into a binder, use an electric mixer to stir the water and binder, to stand for 5 to 10min stirred again to use. ? 3, if the stirring time is less than 5 kg of the weight of the binder, may be used in the manual mixing mode. Third, paving construction? 1, with the tooth scraper mixing good adhesive applied to the work surface, so that a uniform distribution, and into a section of the tooth. Each coated area of ??about 1m2 (depending on the weather temperature), and then in the open time will be glued brick panels on the work surface can be kneaded. ? 2, select the size of the tooth scraper should consider the degree of flatness and convex face brick panels on the back. ? 3, if the fissure on the back panel dark or brick stone, brick panels larger and heavier, you should take the back Face and brick panels simultaneously applying an adhesive way for construction. 4, no nails paste stone facade, stone area should be no more than 400mm × 400mm, thickness should not exceed 20mm. If the stone 18mm or less in thickness, the area may be amplified accordingly. Area and thickness exceeded, or mass, specific weight of the stone, must first do live testing to determine whether it is appropriate to take Paste studless Paste. Notes? 1, construction temperature 5-40 ℃. When rain construction, we must do shielding protective measures, and to ensure, within 24h after tiling, construction area is not dry in the rain. 2, the ratio of the binder and water may vary from the substrate, weather, construction conditions and make appropriate adjustments. Preparation of a good adhesive should be used within 2-3h control according to the weather conditions, it should not have been dry binder mix water before use. ? 4, after the paving is completed, subject to the adhesive to dry completely (about 24h) before the next step of sealing processes. ? 5, the binder should be uniform and full stick blade coating, the thickness of the adhesive layer should be about tooth scraper used half of the pitch is high. ? Reference amount? 1, paste the small size of the tiles, it is recommended to use 6mm × 6mm tooth scraper. ? 2, when pasting large size tiles, recommended that the 10mm × 10mm or 12mm × 12mm tooth scraper. ? 3, the use of different tooth scraper dosage: ??? packaging storage 1, the product packaging specifications for the 20kg ± 0.5kg / bags?. ? 2, the product unopened, should be in a dry, cool, ventilated place.